NON FERRIC ALUMINIUM SULPHATE
NON FERRIC ALUMINIUM SULPHATE
Non Ferric Alum (Aluminium Sulphate) is used mainly in the pulp and paper industry and as a
flocculating agent or coagulant in water and waste treatment for clarifying and or purifying
sewage and water for clarifying fats, oils and petroleum products. It also act as a leather tanning
agent as a pH stabilizer applied to soils to make it less alkaline or to produce acid conditions. It is
used as cement hardening accelerator; a mordant in dyeing anti-caking agent a fire extinguisher, a
flame retardant additive and a foaming agent in firefighting foams.
- High-performance primary coagulant
- Formation of strong compact flocs
- Low sludge production
- Forms a complex resinate that spreads evenly over the surface of paper.
- Imparts better brightness to paper when used with rosin for sizing
- Work as filling and binding agent in bar soap
- As mild astringent and antiseptics for skin treatment
- Decolorizing and deodorizer agent
- Waterproofing concrete and cement hardener
- Treatment of potable and process water, sewage and industrial effluent
- Pulp and paper mills
- Tanneries
- Pharmaceutical
- Construction chemicals
- Textile Industry
ROCKIN- Cement based Achour Grout
ROCKIN- Resin based Anchor Grout
ROCKIN – Resin based Anchor Grout
ROCKIN-Resin based Anchor Grout is three component,high performance,high precision,low exothermic,porable,solvent-free epoxy grouting system.
- High early strength and fast curing
- Ready-to-mix, pre-batched units
- Non-shrink grout
- Corrosion and chemically resistant
- Stress and impact resistance
- High compressive strength
- Crash barrier posts
- Fence and railing posts
- Anchors
- Base plates
- Tracks for rail and crane
- Mechanical Joints
Packaging: ROCKIN Anchor Grout- Cement based comes in 25 kg bag. Storage: Store ROCKIN Series properly in dry condition in undamaged and unopened original sealed packaging between 10 - 30°Caway from direct sunlight.
- Pre-batched unit A+B+C 15 kg x 2 sets
- Part A- 2 kg packet
- Part B- 1 kg packet
- Part C- 12 kg bag
Super HR 700 Concrete Plasticiser
Super HR 700 Concrete Plasticiser
Super HR 700 Concrete Plasticiser is a unique combination of the latest generation superplasticisers , based on a
polycarboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. Super HR 700
combines properties of water reduction and workability retention. It allows the production of high performance
concrete and/or concrete with high workability.
- Increased early and ultimate compressive strengths
- High workability for long period
- Better resistance to aggressive atmospheric condition reduced shrinkage and creep
- Improved adhesion to reinforcing and prestressing steel
- Increased flexural strength
- Lower permeability
- To produce pumpable concrete for medium grade of concrete
- Concrete requiring long workability retention
- High performance concrete for durability
- Suitable for precast units like paver blocks, Hollow-core planks & dry-cast pipes
- Water reduction of 20% or more is possible
Super HR 800 Concrete Plasticiser
Super HR 800 Concrete Plasticiser
Super HR 800 is a combination of the latest generation super plasticisers, based on polycarboxylic ether with long
lateral chains. Its mechanism considerably reduces the water demand in flow-able concrete. Super HR 800 has
combined properties of water reduction and workability retention. It allows the production of high performance
concrete with desirable workability. Super HR 800 with the presence of viscosity modifying agents helps to reduce
bleeding and segregation in concrete to produce consistent batches of SCC/high flow mixes.
- Very high early and ultimate compressive strengths
- l High workability for extended period
- Lower permeability
- Better resistance to aggressive atmospheric condition reduced shrinkage and creep
- Improved adhesion to reinforcing and pre-stressing steel
- l Increased durability
- To produce pumpable and self-compacting concrete
- Concrete requiring long workability retention
- High performance concrete for durability
- Suitable for precast units like paver blocks, Hollow-core planks & dry-cast pipes
- Water reduction of 25% or more is possible
Super HR 900 Concrete Plasticiser
Super HR 900 Concrete Plasticiser
Super HR 900 is an admixture of a new generation based on second-generation polycarboxylic ether polymer with high
early strength gains. It is free of chloride & low alkali. It is compatible with all types of cement. Super HR 900 combines
properties of water reduction and workability retention. It allows the production of high performance concrete and/or
concrete with high workability.
- Produces Flowable concrete even at low water cement ratio.
- Optimize curing cycles by reducing curing time or curing temperatures
- Improved engineering properties, compared to traditional super plasticiser such as early and ultimate compressive and flexural strengths
- High early and long term strength
- Increase productivity/ reduction in cycle time
- l Reduced shrinkage and low permeability
- To produce self-compacting concrete
- Super workable concrete having fluid consistence
- Low water binder ratio
- Produce durable precast concrete elements
- Water reduction of 25% or more is possible
- High early and long term strength
- Dosage as per IS standard is recommended
- Dosages outside the typical ranges quoted above can be used to meet particular requirements.
- An overdose may result in high workability, slight increase in air entrainment and retardation of setting time.
- Measured quantity of Super N should be added along with the gauging water.
- Add Dalton Admixture in the last phase after prewetting the mix with 80% of the total water required for better result
- Trials need to be carried out at site to determine the exact dosage of the admixture for the particular mix
Packaging: Dalton Admixtures are available in 250 Kg drums. Storage: Store Dalton Admixtures in dry conditions at temperatures between +10°C and +30°C. Protect from direct sunlight and frost. Health and Safety: Dalton Admixtures are non-toxic. Any splashes on the skin should be washed immediately with water. Splashes to the eyes should be washed immediately with water and medical advice should be sought. IS Standard: Dalton Admixtures conforms to the specifications of ASTM C 494, type F and type G, and IS 9103-1999.
Super HR- Concrete Plasticiser
Super N Concrete Plasticiser
Super HR- Concrete Plasticiser
Super HR Concrete Plasticiser is a high range water reducing new generation hyper plasticiser based on modified
polycarboxylic ether. Intended for applications where water reduction and long work-ability retention are required.
- Increases higher strength with maximum water reduction.
- Improves workability and reduces permeability due to allow water-cement ratio.
- Compatible with all types of cement.
- Reduced segregation with increased cohesion.
- Customized products developed as per specific requirements of mix design.
- To produce pumpable concrete for lowermedium grade of concrete
- To produce high workability concrete requiring little vibration during placing
- Suitable for precast units like paver blocks, hollow-core planks & dry-cast pipes
- It can be recommended up till M40 grade of concrete
SuperJoint Block Adhesive
Super Joint Block Adhesive
Dalton Superjoint Block Adhesive is ready to use grey cement based non-shrink, self- curing mortar for fixing AAC
blocks, concrete blocks, fly ash bricks etc. Made of cement, graded sand, and blended with polymers, it is high-strength
adhesive for quick and firm laying of blocks and bricks even when thickness is of 2-3 mm layer.
- Easy to use, only water to be added
- High Bond Strength
- No Shrinkage Cracks
- High Coverage
- Premixed- Zero waste
- Curing not required
- Appearance- Grey Powder
- Water Required 35%
- Pot Life- 1.5 - 2 hrs
- Tensile Adhesive Strength>0.41 Mpa
- Coverage- 170 - 180 sq.ft (for 4" thick blocks)
SuperJoint Tiles Adhesive
SuperJoint Tiles Adhesive
Dalton SuperJoint Tiles Adhesive is a cement-based polymer integrated adhesive for internal & external applications.
It is normal setting, self curing, easy fixing floor and wall tile adhesive with no vertical slip. It provides excellent
waterproofing properties and prevents the cracking of tiles. It can create adhesive layers up to 10 mm thickness.
- Easy to use, only water to be added
- High Bond Strength
- l No Shrinkage Cracks
- High Sag Resistance
- Premixed- Zero waste
- Extended Open Time
- Appearance- Grey Powder
- Water Required 26-28%
- Pot Life >60 mins
- Open Time >30 mins
- Slip resistance ≤ 0.5 mm
- Tensile Adhesion Strength >2.0 kN
SUPPORT GRAVELS
SUPPORT GRAVELS
Support gravel is used in the lower strata of a filter bed as a support to filter media . For maximum efficiency, the gravel
must posses necessary attributes of hardness and be rounded or non-angular. The gravel, like filter sand, contains hard
durable particles with a slow breakdown rate. This helps to prolong filter media life. The gravel is screened into different
sizes which effectively supports the filter media.Correct gradation and sizing must be calculated to properly support the filter media.
- Free of organic impurities
- l The grains are smooth and rounded or sub-angular
- It is made of hard, insoluble, siliceous material
- Uniform in size
- Color: Multi colour
- Shape: Naturally pherical
- Bulk Density: 1550 – 1800 Kg/m3
- Size: 0.5 – 4 inch
- Acid Solubility: 2-10 %
- Specific Gravity: 2.5-2.70
UltraWall Bond
Ultra Wall Bond
UltraWall Bond creates excellent bond between RCC wall and gypsum based plaster or cement based premix plaster.
Its application eliminates the RCC wall grinding process or putting wire mess to roughen the surface. UltraWall bond
application acts as a pre – treatment of smooth RCC background to make it coarse and improves its bonding
properties.
- Single coat application
- Ready to use formulation
- Impart chemical and mechanical bond
- High tensile strength
- High coverage area
- Low Suction Surface
- RCC wall and cealing
- RCC columns and beams
- RCC slabs
- Shear Wall
Packaging: Dalton UltraWall series comes in 20 kg bag / 25 kg bag / 20 ltr drum. Storage Condition: Store Dalton Wall care products in dry conditions at temperatures between +10°C and +30°C. Protect from direct sunlight and frost.
