AquaCease Integral Mix
AquaCease Integral Mix
AquaCease Integral Mix is an additive for concrete or mortar for ensuring better water proofing and protection. It
contains additives and polymers which makes concrete cohesive and less of capillaries.It an integral liquid water
proofing admixture designed to be added at the time of batching and by doing so catalytic crystalline growth are being
form within the concrete making it waterproof.
- Add 50-70 % of required water and mix the mass to make it moist
- Add 50-70 % of required water and mix the mass to make it moist
- Add AquaCease Integral Mix to the remaining water and pour it in the mixing drum and mix the entire quantity for approx. 3 minutes to achieve homogenous mix.
- Pour the mixture on a tray and use as per requirement and lay the concrete
- Cure as per normal procedure by ponding/ curing compound
- Maximizes waterproofing within concrete
- Reduce shrinkage and cracking
- Improves workability without increased water content
- Compatible with all varieties of portland cement including slag cement
- No added chloride thus not contributing to corrosion of steel
- Flat and Slope Roof Slabs
- Beams and Columns
- Water tanks and reservoirs
- Water tanks and reservoirs
- Repair and renovation
- Repair and renovation
- Water retaining structures
AquaCease SBR Super Coat
SuperJoint Tiles Adhesive
Dalton SuperJoint Tiles Adhesive is a cement-based polymer integrated adhesive for internal & external applications.
It is normal setting, self curing, easy fixing floor and wall tile adhesive with no vertical slip. It provides excellent
waterproofing properties and prevents the cracking of tiles. It can create adhesive layers up to 10 mm thickness.
- Easy to use, only water to be added
- High Bond Strength
- l No Shrinkage Cracks
- High Sag Resistance
- Premixed- Zero waste
- Extended Open Time
- Appearance- Grey Powder
- Water Required 26-28%
- Pot Life >60 mins
- Open Time >30 mins
- Slip resistance ≤ 0.5 mm
- Tensile Adhesion Strength >2.0 kN
AquaCease Top Coat
AquaCease Top Coat
AquaCease Top Coat is an elastomeric premium quality acrylic based coating best suitable for any waterproofing
applications with antifungal and crack bridging ability. The high solid acrylic content makes it more durable and
effective for protection of concrete as well as metal structures.
- Remove contamination from surface to have better bonding between surface and coating
- Depressions are filled and leveled by using crack filler
- Coating should be applied in one direction by brush, roller or spray
- Two coatings should be applied. Apply the second coat at 90° to the first as soon as it is dry
- During first 12 hours it must be saved from water, rain and adverse conditions
- High flexibility and elongation
- Can bridge hairline cracks
- Vapor permeable
- Good surface hardening capability
- Can be applied by brush, roller, or spray applications
- Resistant to mildew
- EIFS
- Masonry and Concrete
- Stucco
- Previously applied acrylic or elastomeric textured finishes
CURIN- Resin based curing compound
CURIN – Resin based Curing Compound
CURIN - Resin based Curing compound is a curing compound based on aluminised synthetic resin for the prevention of
premature water loss from concrete. It is in ready to use form and simple to apply. It is sprayed on to newly laid concrete
surfaces to form a thin film barrier against premature water loss. Without disturbance to the normal setting action the
concrete is then allowed to cure and achieve maximum properties.
- Improves water retention.
- Uniform film formation increases ultimate strength.
- Reduces thermal cracks and shrinkage
- Easy to spray.
- High reflectance helps reduce fast drying on concrete.
- Highways, Runways and Taxiways
- Industrial floors and Roof Decks
- Canals linings
- Columns and Beams
Packaging: CURIN series comes packed in 25 ltr, 100 ltr and 230 ltr drum. Storage Condition: Store CURIN series in dry conditions at temperatures between +10°C and +30°C. Protect from direct sunlight and frost.
CURIN - Resin based Curing compound is normally applied over the green concrete right after the evaporation of surface water. After drying, it forms a thin film on the concrete surface which decays with time. The film should be protected from initial heat, rain or any thermal calamity.
CURIN- Wax based curing compound
CURIN – Wax based Curing Compound
CURIN - Wax based Curing compound is ready to use, liquid curing compound based on paraffin and blended with
aluminium compound to substantially increase light reflectance to effectively prevent premature water loss from the
concrete both due to heat of hydration and sunlight. It is sprayed on to newly laid concrete surfaces to form a thin film
barrier against premature water loss and there by promote total cement hydration.
- Improves water retention.
- Uniform film formation increases ultimate strength.
- Reduces thermal cracks and shrinkage
- Easy to spray.
- High reflectance helps reduce fast drying on concrete.
- Highways, Runways and Taxiways
- Industrial floors and Roof Decks
- Canals linings
- Columns and Beams
CURIN - Wax based Curing compound is normally applied over the green concrete right after the evaporation of surface water. After drying, it forms a thin film on the concrete surface which decays with time. The film should be protected from initial heat, rain, or any thermal calamity.
DAFL – Dalton Alkali Free shotcreting Liquid Accelerator
DAFL- Dalton Alkali Free shotcreting Liquid Accelerator
Dalton AFL is an alkali-free accelerator available in liquid form for use with sprayed concrete for guniting/shotcreting.
It is a liquid additive whose dosage can be varied to the desired setting and hardening times.
- Free of chlorides, no danger to steel reinforcement and steel fibres
- Very fast setting of shotcrete mixes
- Large reduction in rebound
- Low viscosity – less pumping problems
- Improves bond of shotcrete to rock and concrete, making overhead spray easier.
- Instant setting in guniting or shotcreting of support lining and waterproofing of tunnels
- Securing of rock in tunnel mine construction
- Rock and slope stabilization
- It is generally dosed at between 3-10 % by weight of cement directly in the shotcreting water pump for wet-mix spraying process. The most effective dosage must be determined by site trials.
- High quality shotcrete for general construction work.
- It is generally dosed at between 3-10 % by weight of cement directly in the shotcreting water pump for wet-mix spraying process. The most effective dosage must be determined by site trials.
DAFP- Alkali Free Shotcreting Powder Accelerator
DAFP- Alkali Free Shotcreting Powder Accelerator
Dalton AFP is an alkali-free accelerator available in powder form for use with sprayed concrete for
guniting/shotcreting. DAFP mixed with gunite tends to reacts and assist the hydration process, resulting in greatly
accelerated strength development within the first 24 hours
- Free of chlorides, no danger to steel reinforcement and steel fibres.
- Temporary and permanent rock support in tunnels and minings
- Very fast setting of shotcrete mixes
- Reduction in rebound
- Better adhesion to areas of slight seepage
- Improves bond of shotcrete to rock and concrete, making overhead spray easier
- It is generally dosed at between 3-10 % by weight of cement directly in the shotcreting water pump for drymix spraying process. The most effective dosage must be determined by site trials.
Packaging: DAFP comes in 25 kg bag Storage: Store DAFP in dry conditions at temperatures between +10°C and +30°C. Protect from direct sunlight and frost. Health and Safety: Dalton Accelerators are non-toxic, non-flammable and eco-friendly. However, it should not be inhaled. Contact with eyes and skin during use should be washed with water immediately. IS Standard: Dalton Accelerators conforms to the specifications of ASTM C 494, type C and IS 9103-1999.
- Instant setting in guniting or shotcreting of support lining
- Waterproofing of tunnels
- Retaining walls, embankment and excavations
- Thin section concrete shells and concrete repair-work
DLSA – Silicate Base Shotcreting Accelerator
DLSA- Silicate Base Shotcreting Accelerator
Dalton LSA is a modified specials-grade liquid silicate accelerator and waterproofing compound for
guniting/shotcreting.
- Increases internal cohesion and adhesion of shotcrete
- Reduced significantly the rebound of the gun mix
- Thick layers can be applied in one application
- Produce a high strength and dense shotcrete
- Dust reductions
Packaging: DAFL and DLSA comes in 250 kg drum. Storage: Store DAFL and DLSA in dry conditions at temperatures between +10°C and +30°C. Protect from direct sunlight and frost.
- Production of permanent gunite and shotcrete elements
- Protect construction pits and subterrain excavations
- Rock and soil stabilization
- It is generally dosed at between 3-10 % by weight of cement directly in shotcreting water pump. The most effective dosage must be determined by site trials.
Filter Media Sand
FILTER MEDIA SAND
Filter media sand are used as a step in the water treatment process of water purification. Importance of filter sand is to
work for physical treatment (catching the turbidity component suspended) in rapid filtration and for biological
treatment in slow filtration. High quality filter sand requires the proper angularity, hardness, spherecity and size. Filter
Sand improves efficiency by reducing retention time and head pressure loss with greater flow rates.
- Filter Sand is all-natural, environmentally safe product
- Angular shape of the uncrushed filter sand promotes good flow and even distribution
- Reduces the load on downstream equipment
- Cost Effective
- Appearance : Yellowish to off white
- Silica Content: 90- 99%
- Ignition Loss: 0.3-0.7%
- Acid Solubility: 1-2%
- Impurities: 1-3%
- Specific Gravity: 2.5 – 2.65
- Uniformity Coefficient: 1.3- 1.7
- Effective Size: 0.45-0.7 mm
GROUTIN Cement Grout
GROUTIN Cement Grout
Dalton GROUTIN Cement Grout is a pre-packed tile grout mix of high-quality portland cement, graded aggregates,
polymers and colour-fast pigments. It is ready to use, single-component grouting premix for ceramic tile, marble,
mosaic, homogenous, granite, and stones. Non-shrink and sag-resistant, perfect solution for both internal and
external applications. Its color-fast and easy-to-use properties make it ideal for joint filling in floor and wall tiles.
- Weather resistant
- Colour fast
- Easy application and clean up
- Easy maintenance
- Non-cracking & Non-shrink
- Water and shock resistant
- Pot Life > 120 min
- Linear Shrinkage < 0.3% @ 27 days
- Water Absorption < 18% @ 27 days
- Compressive Strength > 20 N/mm2 @ 28 days
- Tensile Strength > 1.75 mpa @ 28 days
- Flexural Strength > 3.5 N/mm2 @ 28 days
GROUTIN EPOXY GROUT
GROUTIN Epoxy Grout
Dalton GROUTIN Epoxy Grout is a chemical-resistant, fully solid epoxy grout that is best suited for the application of
ceramic and vitrified tiles, stones, and marble. Dalton Epoxy Grout is a three-component color-fast and hard-wearing
tile joint filler that can easily fill gaps and levels itself providing a dust-proof tile joint. It is a stain resistant, water
resistant & germ resistant grout for floor & wall.
- Easy To Use and Clean
- Chemical and Thermal Resistant
- Water and Shock Resistant
- Stain Resistant
- Non-cracking or powdering
- High Compressive Strength
- Initial Setting Time >120 Minutes
- Compressive Strength after 7 days > 25 mpa
- Shrinkage after 7 days < 0.25%
- Pot life- 45 mins
- Foot traffic - 24 hours
- Heavy Traffic- 7 days
Packaging: Dalton Tile and Stone Installation products comes in 5kg bucket /10 kg bucket / 20 kg bag. Storage Condition: Store Dalton Tiles and Stone installation products in dry conditions at temperatures between +10°C and +30°C. Protect from direct sunlight and frost.
MICRO SILICA
MICRO SILICA
Dalton Micro Silica is highly reactive pozzolan non-crystalline (amorphous) silica dioxide used as
mineral admixture in concrete. It greatly improves compressive strength, bond strength, early age
strength and abrasion resistance, reduces permeability improves consistency and therefore helps
in protecting reinforcing steel from corrosion. Dalton Micro Silica is compliant with IS 15388, ASTM
C1240 and EN 13263.
- High early and higher ultimate compressive strength
- High impermeability and significantly less rebound loss
- Protect steel from corrosion
- Improve pumping properties
- Improves durability to attack by chloride and sulphate
- Reduces thermal cracking caused by the heat of cement hydration
- High Strength Concrete
- Waterproof Concrete
- High performance concrete
- Structural concrete
- Precast concrete
- Tunneling and sprayed concrete
- Marine concrete
- Concrete exposed to environmental and chemical attack
