Super N Concrete Plasticiser
Super HR- Concrete Plasticiser
- Increases higher strength with maximum water reduction.
- Improves workability and reduces permeability due to allow water-cement ratio.
- Compatible with all types of cement.
- Reduced segregation with increased cohesion.
- Customized products developed as per specific requirements of mix design.
- To produce pumpable concrete for lowermedium grade of concrete
- To produce high workability concrete requiring little vibration during placing
- Suitable for precast units like paver blocks, hollow-core planks & dry-cast pipes
- It can be recommended up till M40 grade of concrete
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Super HR 700 Concrete Plasticiser
Super HR 700 Concrete Plasticiser
- Increased early and ultimate compressive strengths
- High workability for long period
- Better resistance to aggressive atmospheric condition reduced shrinkage and creep
- Improved adhesion to reinforcing and prestressing steel
- Increased flexural strength
- Lower permeability
- To produce pumpable concrete for medium grade of concrete
- Concrete requiring long workability retention
- High performance concrete for durability
- Suitable for precast units like paver blocks, Hollow-core planks & dry-cast pipes
- Water reduction of 20% or more is possible
Super HR 800 Concrete Plasticiser
Super HR 800 Concrete Plasticiser
- Very high early and ultimate compressive strengths
- l High workability for extended period
- Lower permeability
- Better resistance to aggressive atmospheric condition reduced shrinkage and creep
- Improved adhesion to reinforcing and pre-stressing steel
- l Increased durability
- To produce pumpable and self-compacting concrete
- Concrete requiring long workability retention
- High performance concrete for durability
- Suitable for precast units like paver blocks, Hollow-core planks & dry-cast pipes
- Water reduction of 25% or more is possible
Super HR 900 Concrete Plasticiser
Super HR 900 Concrete Plasticiser
- Produces Flowable concrete even at low water cement ratio.
- Optimize curing cycles by reducing curing time or curing temperatures
- Improved engineering properties, compared to traditional super plasticiser such as early and ultimate compressive and flexural strengths
- High early and long term strength
- Increase productivity/ reduction in cycle time
- l Reduced shrinkage and low permeability
- To produce self-compacting concrete
- Super workable concrete having fluid consistence
- Low water binder ratio
- Produce durable precast concrete elements
- Water reduction of 25% or more is possible
- High early and long term strength
- Dosage as per IS standard is recommended
- Dosages outside the typical ranges quoted above can be used to meet particular requirements.
- An overdose may result in high workability, slight increase in air entrainment and retardation of setting time.
- Measured quantity of Super N should be added along with the gauging water.
- Add Dalton Admixture in the last phase after prewetting the mix with 80% of the total water required for better result
- Trials need to be carried out at site to determine the exact dosage of the admixture for the particular mix
Packaging: Dalton Admixtures are available in 250 Kg drums. Storage: Store Dalton Admixtures in dry conditions at temperatures between +10°C and +30°C. Protect from direct sunlight and frost. Health and Safety: Dalton Admixtures are non-toxic. Any splashes on the skin should be washed immediately with water. Splashes to the eyes should be washed immediately with water and medical advice should be sought. IS Standard: Dalton Admixtures conforms to the specifications of ASTM C 494, type F and type G, and IS 9103-1999.
Reviews
There are no reviews yet.