Super HR- Concrete Plasticiser

• Increased early and ultimate compressive strengths
• High workability for long period
• Better resistance to aggressive atmospheric condition reduced shrinkage and creep
• Improved adhesion to reinforcing and prestressing steel
• Increased flexural strength
• Lower permeability

• To produce pumpable concrete for medium grade of concrete
• Concrete requiring long workability retention
• High performance concrete for durability
• Suitable for precast units like paver blocks, Hollow-core planks & dry-cast pipes
• Water reduction of 20% or more is possible

• Very high early and ultimate compressive strengths
• l High workability for extended period
• Lower permeability
• Better resistance to aggressive atmospheric condition reduced shrinkage and creep
• Improved adhesion to reinforcing and pre-stressing steel
• l Increased durability

• To produce pumpable and self-compacting concrete
• Concrete requiring long workability retention
• High performance concrete for durability
• Suitable for precast units like paver blocks, Hollow-core planks & dry-cast pipes
• Water reduction of 25% or more is possible

• Produces Flowable concrete even at low water cement ratio.
• Optimize curing cycles by reducing curing time or curing temperatures
• Improved engineering properties, compared to traditional super plasticiser such as early and ultimate compressive and flexural strengths
• High early and long term strength
• Increase productivity/ reduction in cycle time
• l Reduced shrinkage and low permeability

• To produce self-compacting concrete
• Super workable concrete having fluid consistence
• Low water binder ratio
• Produce durable precast concrete elements
• Water reduction of 25% or more is possible
• High early and long term strength

• Dosage as per IS standard is recommended
• Dosages outside the typical ranges quoted above can be used to meet particular requirements.
• An overdose may result in high workability, slight increase in air entrainment and retardation of setting time.
• Measured quantity of Super N should be added along with the gauging water.
• Add Dalton Admixture in the last phase after prewetting the mix with 80% of the total water required for better result
• Trials need to be carried out at site to determine the exact dosage of the admixture for the particular mix

Packaging: Dalton Admixtures are available in 250 Kg drums. Storage: Store Dalton Admixtures in dry conditions at temperatures between +10°C and +30°C. Protect from direct sunlight and frost. Health and Safety: Dalton Admixtures are non-toxic. Any splashes on the skin should be washed immediately with water. Splashes to the eyes should be washed immediately with water and medical advice should be sought. IS Standard: Dalton Admixtures conforms to the specifications of ASTM C 494, type F and type G, and IS 9103-1999.

• Increases higher strength with maximum water reduction.
• Improves workability and reduces permeability due to allow water-cement ratio.
• Compatible with all types of cement.
• Reduced segregation with increased cohesion.
• Customized products developed as per specific requirements of mix design.

• To produce pumpable concrete for lowermedium grade of concrete
• To produce high workability concrete requiring little vibration during placing
• Suitable for precast units like paver blocks, hollow-core planks & dry-cast pipes
• It can be recommended up till M40 grade of concrete